Marine » Developer.Team

ZylGPSSimulator 2.00

ZylGPSSimulator 2.00
ZylGPSSimulator 2.00 | 668 kB


ZylGPSSimulator (former ZylNMEAGenerator) is a Delphi & C++ Builder component that transforms position data in NMEA 0183 format. NMEA 0183 is a standard protocol, used by GPS receivers to transmit position data. NMEA 0183 (or NMEA for short) is a combined electrical and data specification for communication between marine electronic devices such as echo sounder, sonars, Anemometer (winds speed and direction), gyrocompass, autopilot, GPS (Global Positioning System) receivers and many other types of instruments. It has been defined by, and is controlled by, the US-based National Marine Electronics Association. You can generate complex NMEA sentences from simple data inputs. The sentences are recognized by any NMEA compatible mapping software. In this way with this component you can simulate a GPS receiver. You just write the generated NMEA sentences on a virtual serial port or an internet socket connected to mapping software.
Read more

ZylGPSReceiver 3.67

ZylGPSReceiver 3.67
ZylGPSReceiver 3.67 | 748 kB


ZylGPSReceiver is an award-winning Delphi & C++Builder component collection that communicates with a GPS receiver (Global Positioning System).
It returns latitude, longitude, altitude, speed, heading and many other useful parameters of the current position and the parameters of the satellites in view. The component is extended to calculate distances and make conversions between different measurement units. This component works with any NMEA 0183 compilant GPS receiver connected to one of the serial ports. NMEA 0183 (or NMEA for short) is a combined electrical and data specification for communication between marine electronic devices such as echo sounder, sonars, Anemometer (winds speed and direction), gyrocompass, autopilot, GPS receivers and many other types of instruments. It has been defined by, and is controlled by, the US-based National Marine Electronics Association. You can use it also with USB, IrDA and Bluetooth devices, because these devices have a driver that redirects the input from the USB, IrDA or Bluetooth port to a virtual serial port (you can check it in System/Device Manager/Ports). If your USB device is not provided with such a driver, then use a USB controller whose vendor provides a virtual serial port driver, such as FTDI or use a USB/RS-232 adapter. For Garmin receivers you have to install Spanner software.
Read more

DNV Software Sesam Marine 2013 version 4.0 Build 10000

DNV Software Sesam Marine 2013 version 4.0 Build 10000
DNV Software Sesam Marine 2013 version 4.0 Build 10000 | 387 Mb


DNV Software’s Sesam Marine lets you visually simulate, test and evaluate marine operations ahead of offshore handling, significantly reducing risk. The ability to visualise the operations in 3D and run multiple �what-if’ scenarios showing the results of all known factors, including dynamic positioning, reduces risk significantly for transportation, installation and lifting of fixed and floating structures and installation of subsea equipment.
Read more